Reasonable use of excavator bucket teeth

With the continuous improvement of people’s utilization rate of excavators, more and more projects are gradually adapted to the existence of such equipment. However, with the use of excavators, the loss of excavator bucket teeth is also increasing, so how should we operate excavator bucket teeth more effectively when we use excavators?


The importance of excavator bucket teeth is self-evident, so you should pay more attention when using it, and you must take correct measures, so that the excavator can be used normally. So, how to use the bucket teeth of the excavator correctly ? Let me introduce it to you below.

Correct choice: The use of excavator bucket teeth should first be the correct choice, and the determination of the material needs to be carried out according to the environment. Only in this way can better ensure the correct selection, and the correctly selected bucket teeth are in use. It can also play a role.

Attention to the angle: the excavator driver should pay attention to the angle of digging during operation, try to master it when digging, the bucket teeth are perpendicular to the working face when digging down, or the camber angle is not greater than 120 degrees, so as to avoid breaking due to excessive inclination. bucket teeth. Also be careful not to swing the digging arm from side to side when there is a large resistance, which will cause the bucket teeth and tooth base to break due to excessive left and right forces, because the mechanical design principle of most types of bucket teeth does not consider the left and right forces.

Timely replacement: The wear of the tooth seat is also very important to the service life of the bucket teeth of the excavator. It is recommended to replace the tooth seat after the tooth seat is worn out by 10%-15%, because the tooth seat and bucket with excessive wear There is a large gap between the teeth, so that the cooperation between the bucket teeth and the tooth seat, and the force point have changed, and the bucket teeth are broken due to the change of the force point.

Post time: Apr-29-2022