The whole structure of the loader is divided into the following parts
1. Engine
2. Gearbox
3. Tires
4. Drive axle
5. Cab
6. Bucket
7. Transmission system
These are the main structural components of the loader. In fact, the loader is not that complicated. Compared with the excavator, the loader is really nothing. The reason why you feel complicated is because you know too little about the loader.
1. Engine
Nowadays, most of the engines using Weichai are equipped with electronic injection. This is a national environmental protection requirement. Some people say that the current electronic injection engine is not as powerful as the old-fashioned engine. In fact, it is compared. The horsepower has not been reduced and it is more environmentally friendly and more fuel-efficient.
2. Gearbox
Gearboxes are mainly divided into planetary and fixed-shaft gearboxes, but planetary gearboxes are now used. For example, XCMG’s 50 loader is mostly equipped with XCMG’s self-made gearboxes. Its characteristic is that it can transmit torque to a large extent. The improvement of the loader makes the loader suitable for various working conditions, and at the same time reduces the wear, sintering and locking of other parts, so that the life of the gearbox is greatly improved.
3. Tires
The current tire options are as follows: 1. Aeolus, 2. Triangle, 3. High-end models or large-tonnage equipped with Michelin tires, as long as the tires do not have sharp hard scratches on the back, there is basically no problem.
4. Drive axle
Drive axles are divided into dry drive axles and wet drive axles. Most of the products are mainly dry drive axles, which are not as good as the dry drive axles made by XCMG on the XCMG 500 loader. Its characteristics: one is its The material is the same as that of the gear, except that it has been heat-treated. This material can greatly increase the service life of the drive axle. In addition, the weight of the drive axle has reached 275KG, which greatly improves its load-bearing capacity.
5.Cab
In addition to the safety of the cab, the noise is also smaller, and there are many user-friendly designs. For example, the instrument panel is a digital combined instrument panel. The numbers are more intuitive to let you know some conditions of the loader. The steering wheel and seats are both It can be adjusted. This design is really good. It allows the driver to adjust according to his height. The large rearview mirror allows the driver’s rear view to be more open (this is also my favorite place, compared to other The rearview mirror of the brand is more than 30% larger), and there are storage compartments, tea cup holders, radios, MP3s, etc.
6. Bucket
Its bucket is formed by pressing a whole piece of steel plate, which is more wear-resistant than a welded bucket and has a longer service life
7. Transmission system
Professional things are more valuable, but to truly make the best products in the boutique, the professional things must be complete sets. Xugong’s transmission system is produced for its special gearbox and engine. We have compared this. Xugong The current loaders are indeed faster than other brand loaders in work efficiency, and more flexible.
Post time: Oct-08-2021